Sony Lbtv702 Specs ^new^

Highly versatile, featuring a Phono input (MM) for turntable integration, connections for a single tape deck, dual line-level inputs, a microphone jack, and a dedicated headphone output for private listening.

The amplifier is the heart of the LBT-V702, built to drive the included speakers with authority for its class.

Note: In the Sony product hierarchy, this system is part of the "LBT-V" series. In some regions, the model number is strictly , while the designation V702 often refers to the specific speaker package bundled with the main receiver unit (HCD-V700). This report covers the full system specifications.

| Specification | Detail | |---------------|---------| | | 3-way 4-speaker bass reflex (per tower) | | RMS Total Power | 280 Watts (140W per channel) | | PMPO Peak Power | 1,400 Watts (Marketing figure) | | Frequency Response | 40Hz – 20,000Hz | | Disc Playback | CD, CD-R/RW | | Tape Deck | Double Auto-Reverse Cassette Deck | | Tuner | PLL Synthesized (AM/FM) with 30 presets | | Graphic Equalizer | 5-band (plus 2 dedicated bass/treble knobs) | | Surround Modes | Dolby Pro Logic (Rear channel virtual) & DSP (Digital Signal Processor) | sony lbtv702 specs

Dedicated MM (Moving Magnet) input for connecting turntables.

No, the original LBT-V702 was manufactured before Bluetooth technology existed. To stream music, you can purchase a separate, inexpensive Bluetooth receiver.

| Category | Specification | |----------|---------------| | | Sony LBT-V702 | | Year | 1997–1999 | | RMS Power | 120W + 120W (6 ohms) | | Peak Power | 330W | | Total Harmonic Distortion | 0.09% | | Frequency Response | 20Hz – 20kHz | | CD Changer | 5-Disc Carousel | | Cassette | Dual Auto-reverse, High-speed dubbing | | Tuner Presets | 30 FM/AM | | Speakers | 3-way, 6.5" woofer, 6-ohm | | Special Modes | GROOVE Bass, Surround, 5-band EQ | | Inputs | Aux (RCA), Optical (Digital Coax), Mic | | Outputs | Coaxial Digital Out, Speaker (Spring) | | Weight (Total) | ~53 lbs (24 kg) | Highly versatile, featuring a Phono input (MM) for

Standard 35.5 cm component width. I/O Interconnects: 1 x Dedicated Phono Input (MM / Moving Magnet stage).

The factory-matched speakers provided with the system were engineered specifically to handle the 6-ohm load outputted by the amplifier.

Over time, the resistors behind the control buttons can oxidize, causing the stereo to misinterpret commands (e.g., hitting "Play" triggers a different input). These can be sprayed with electronic contact cleaner or replaced during servicing. In some regions, the model number is strictly

degrade. Sourcing a standard Sony V702 Belt Kit on eBay is a standard rite of passage for modern restoration. 4. Digital AM/FM Tuner (ST-V702)

: Nominal impedance of 6 Ohms with an overall sensitivity rating of 89 dB (measured at 1W/1m).

: Built using an 18-bit digital filter running an 8x oversampling engine.

Rated specifically for 6 Ohm configurations.

Before we dig into the weeds, here is a datasheet of the most critical specifications: