Satlink Ws-6979 Software Upgrade ((install))

: Power on the Satlink WS-6979 and insert the USB drive into the data service port Access System Settings : Use the physical buttons to navigate to the menu and select the Software Upgrade Confirm Update

Follow these steps precisely to execute the firmware flash via the USB port. Step 1: Download the Firmware

Plug the 9-pin serial end into the meter and the USB end into the PC. 4. Run the Upgrade Tool

Satlink WS-6979 Software Upgrade: The Complete Step-by-Step Guide

: A progress bar will appear. Do not touch any buttons or power off the device until it finishes. Satlink Ws-6979 Software Upgrade

Never rename the firmware file unless explicitly instructed by the manufacturer documentation. An incorrect file extension or name can cause the bootloader to reject the file or corrupt the flash memory. Step-by-Step Software Upgrade Procedure

Right-click the drive, select , choose FAT32 as the file system, and click start. (Note: This erases all data on the drive).

| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | "File not found" | File name wrong or not in root | Rename file to update.upd or ws6979.upd (case sensitive). | | Stuck at 0% | Corrupted SD card or file | Reformat SD card. Redownload firmware. Try a 4GB card (no SDHC/SDXC). | | White screen after reboot | Clone device with wrong firmware | Only fix: Contact seller for clone-specific file. | | Satellites missing | Old user data persisted | Perform (Menu > System). | | USB not recognized | Loose cable or wrong driver | Use SD card method instead. |

This usually indicates a corrupted firmware file download. Redownload the file and try again with a different USB drive. : Power on the Satlink WS-6979 and insert

Select (or AllCode if prompted for the upgrade mode). 4. Execute the Firmware Flash

Download the correct .bin file specific to the Satlink WS-6979. Do not use files meant for the 6933, 6908, or 6980 models.

Newer software versions optimize video playback decoding on the 4.3-inch TFT LCD screen. Prerequisites Before Upgrading

Do not fear the upgrade. With this guide, you have the roadmap to breathe new life into your Satlink WS-6979. Happy satellite hunting! Run the Upgrade Tool Satlink WS-6979 Software Upgrade:

: Ensure the software detects the COM port. If it fails to connect, check your cable and drivers.

Are you looking to update your or fix a specific software bug ?

What or behavior are you experiencing with the device?

file) in the root directory of your USB flash drive. Do not put it inside any folders. Insert the Drive:

Select the .bin file displayed on the screen. Press to begin the upgrade. A progress bar will appear. Do not touch the buttons or disconnect the power during this process.