Choose your software from the options above and install it according to its instructions.
Navigate to the official Puxing Industrial Co., Ltd. support page. Look for the "Downloads" or "Service" section. Historically, they host the raw .exe files. Note: The site is often in Chinese, so use browser translation.
Turn off the radio, unplug the 2-pin cable, and turn the radio back on to test your newly programmed channels. 7. Troubleshooting Common Errors
The Ultimate Guide to Puxing PX-777 Programming Software Download and Setup puxing px-777 programming software download
Note the number in parentheses (e.g., ). You will need this number later. Step 3: Install the Puxing PX-777 Software Extract the downloaded Puxing software .zip archive. Run the installer file (usually setup.exe ). Follow the on-screen prompts to complete the installation.
It is actively updated, compatible with Windows 10/11, and offers a more intuitive interface.
You will need:
Using the official programming software (often referred to as the "CPS" or Customer Programming Software) is the most efficient way to manage channels. Here is what you need to know about downloading and using the software.
the official manufacturer software (often called "6-in-1") and the popular free, open-source tool 1. Programming Software Options CHIRP (Free / Open Source) Description
The K1 connector must be pushed in completely. It often requires a firm "click" to seat properly. Choose your software from the options above and
Features
This is the most crucial step. Open the software, select Radio -> Download from Radio (or similar). Select Puxing as the manufacturer and PX-777 as the model.
It is more stable on modern versions of Windows (10/11) and macOS than the original factory software. Look for the "Downloads" or "Service" section
The Puxing PX-777 is a legacy dual-band (VHF/UHF) amateur radio transceiver. While it was popular for its ruggedness and affordability, programming it manually via the keypad can be tedious due to the complex menu structures required to set up offset directions, CTCSS tones, and channel names.