Yes, but with a caveat. The PS5 removed the optical port. You must use a HDMI Audio Extractore-optical cable setup to get Dolby Digital surround sound. You can run the optical cable from the extractor to the MixAmp, and the USB to the PS5 for power/voice. If you plug the MixAmp in via USB only, you will get stereo sound with no hardware Game:Voice balance.
Cycles through four saved equalizer settings (indicated by LED quarters).
If you have a specific, older version of the MixAmp (like the 5.8 wireless), I can help with that, too. Let me know: Which you are using (PC, PS4, or Xbox). If you are having a mic or audio issue.
If you require the absolute latest firmware or a warranty replacement, visit Logitech’s support site directly. For everything else—EQ sharing, stream port routing, or chat balance—bookmark this page. Astro Mixamp Ma3p03 Manual
Note: Ensure your MA3P03 unit is the specific Xbox-compatible version (indicated by green accents), as the PlayStation version (blue accents) will not support USB voice chat on Xbox. Connect the USB and Optical cables to the console. Turn the MixAmp on in (Red LED ring). Go to Xbox Settings > General > Volume & Audio Output . Set Optical Audio to Bitstream Out . Set Bitstream Format to Dolby Digital . Astro Command Center Software
Set the to Astro MixAmp Pro Voice .
Your Mixamp will not function correctly without firmware version (for Gen 4 units). The manual says "check online," but here is the exact process: Yes, but with a caveat
astrogaming.com/support or astrogaming.com/software
from the back of the MixAmp to your console or computer for power and voice data. Optical Connection (PS4 only) : For Dolby 7.1 surround sound, connect a TOSlink optical cable from the "OPTICAL" port on the MixAmp to the PS4. PC Sound Settings Astro MixAmp Pro Game Default Playback Device Astro MixAmp Pro Voice Default Communication Device Key Controls & Ports : Adjusts master volume. Balance Dial : Controls the mix between
Set as your Default Playback Device for game audio. You can run the optical cable from the
Cycles through four built-in EQ profiles for different gaming genres. Setting Up Your MixAmp PC Setup
Toggles between Dolby Surround Sound and Passthrough (Stereo) mode.
Open the Astro Command Center and lower your (the volume of your own voice in your headset) or switch your Microphone Noise Gate to Home or Tournament mode.
| Issue | Solution | | :--- | :--- | | | Ensure USB is connected. Check Windows/macOS sound output is set to "ASTRO A10/M3". Ensure the Master Volume wheel is turned up. | | Mic Not Working | Check that the headset cable is fully inserted (you should hear a click). Check OS privacy settings to ensure the microphone is allowed. Ensure the Mute button is not active. | | Echo/Feedback | Lower the Game Volume or Voice Chat volume to prevent sound from bleeding into the microphone. | | One Side Silent | Check the 3.5mm connection between the headset and the MixAmp; ensure it is straight and fully inserted. |
