Lumenis M22 User Manual //free\\

A 1565 nm fiber laser for non-ablative skin resurfacing. It utilizes an advanced scanner for precise, fractional treatments.

The Nd:YAG handpiece emits a 1064 nm wavelength. It treats deeper vascular lesions and leg veins. 2x4 mm, 6 mm, and 9 mm Cooling: Multiple sequential pulsing with contact cooling

: Continuous Sapphire contact cooling keeps epidermal surfaces protected. Q-Switched Nd:YAG Wavelength : 1064 nm

Place the sapphire crystal flat against the skin with light pressure. Ensure no air bubbles are trapped beneath.

Operating an advanced laser/IPL platform requires rigid adherence to laser safety standards (ANSI Z136.3 / EN 60825). lumenis m22 user manual

Clean the touch screen with a dry microfiber cloth or a dedicated electronics wipe. Do not spray liquids directly onto the display screen. Error Codes and Troubleshooting Error: "Water Flow Low"

This comprehensive guide serves as a practical overview of the operation, protocols, safety standards, and maintenance requirements found in the official Lumenis M22 user manual. 1. System Overview and Core Technologies

Superficial pigmented lesions, freckles, and epidermal melasma.

Clean the optical windows and light guides with 70% isopropyl alcohol and lint-free wipes. A 1565 nm fiber laser for non-ablative skin resurfacing

Before clinical application, the user manual dictates a manual calibration check:

The length of time the light energy is applied. This must align with the Thermal Relaxation Time (TRT) of the target tissue. Thicker targets require longer pulse durations; smaller targets require shorter pulses.

Connect the required handpiece to the universal connection port until it clicks.

Located on the front panel for immediate power termination. Patient Contraindications It treats deeper vascular lesions and leg veins

Press the handpiece trigger or press the footswitch to deliver the pulse. 5. ResurFX Fractional Laser Protocol

Schedule professional preventive maintenance annually to recalibrate power outputs and check alignment. Common Error Codes and Troubleshooting Error Symptom / Code Potential Cause Recommended Action Loose connection at the console chassis. Power down system, re-seat the plug, and restart. "Cooling Error" Low internal distilled water levels or blocked airflow.

Schedule preventive maintenance with a certified Lumenis technician.