This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Use a tool like to make the USB bootable into FreeDOS.
4 × DDR3 DIMM slots (Non-ECC, unbuffered, up to 16GB total capacity).
Unlike retail motherboards, the MS-7613 BIOS is a highly restricted environment. Users often find that typical MSI "retail" features, such as overclocking or advanced voltage control, are entirely absent. This was a intentional design by HP to ensure stability in pre-built systems, but it poses challenges for modern enthusiasts trying to squeeze more power out of the aging platform. Critical BIOS Versions and Compatibility ms-7613 ver 1.1 bios
Modern graphics cards (such as the NVIDIA GTX 10-series/RTX series or AMD RX series) require a motherboard BIOS that supports UEFI. If you install a modern GPU on this board, your system will likely hang at the blue HP splash screen and beep codes will sound.
| Component/Feature | Technical Details | | :--- | :--- | | | Micro-ATX (24.4 cm x 24.4 cm / 9.6 in x 9.6 in) | | Chipset | Intel H57 Express | | CPU Socket | LGA 1156 (Socket H) | | Supported CPUs | Intel Core i3, i5, i7 (1st Gen), Pentium, Celeron (Nehalem/Westmere) | | Memory Slots | 4 x 240-pin DDR3 DIMM, Dual-Channel | | Max Memory | Up to 16GB (4 x 4GB modules) | | Supported RAM | DDR3, 1066/1333 MHz (non-ECC, unbuffered) | | Storage | 4 x SATA 3.0 ports (3 Gb/s) | | PCI Express | 1 x PCIe x16 (for graphics), 3 x PCIe x1 | | Legacy Slots | 1 x PCI slot (32-bit) | | Video Outputs | DVI, VGA, and HDMI (varies by revision) | | Audio | Realtek ALC888S (8-channel HD Audio) | | LAN | Realtek RTL8111DL Gigabit Ethernet (10/100/1000 Mbps) | | Rear USB | Up to 10 USB 2.0 ports (6 rear, 4 via headers) | | Other | IEEE 1394 (FireWire) port, S/PDIF optical output |
HP versions for this board typically look like or 6.xx (e.g., v5.14, v6.18). This public link is valid for 7 days
The biggest headache with the MS-7613 Ver 1.1 BIOS involves DDR3 RAM density.
Most HP BIOS installers for this motherboard are designed to run specifically within Windows 7 . If you are using Windows 10 or 11, you may need to run the installer in compatibility mode or use a temporary Windows 7 installation. How to Access and Manage BIOS
MS-7613 (Iona-GL8E) is a micro-ATX motherboard manufactured by Can’t copy the link right now
The H55 chipset cannot read high-density single-rank 4GB memory modules.
What (CPU, RAM, or GPU) are you trying to install? What is the exact issue or error you are currently facing?
At first glance, updating a BIOS on a decade-old motherboard seems unnecessary. However, there are valid reasons:
Legacy H55 boards are notoriously picky about high-density DDR3 RAM modules. BIOS updates improve compatibility with newer 4GB dual-rank modules.
Turn on the PC and tap F10 to enter the BIOS setup screen to verify the motherboard ID matches the HP asset tag. Step 2: Source the Correct Firmware File