The software tool should now display a "Connected" status, and a progress bar will show the data transferring from the PC to the satellite finder.
⚠️ – Updating erases custom satellite lists. Back up your user data if the meter allows.
Do disconnect the cable or turn off your Satlink device while the update is in progress. Interrupting the flash process can corrupt the device's memory.
Once you've prepared the files and checked the requirements, you can proceed with the update: satlink ws 6933 software update work
Once the software confirms a "Success" or "Burn Flash Completed" message: Turn off the meter and unplug the USB cable. Turn the meter back on.
, as using the wrong firmware (e.g., for a WS-6906) can cause the device to malfunction. Step 2: Connect the Meter to Your PC Turn off your Satlink WS 6933
: Use the manufacturer’s specified update software on your PC. You may need to select the specific .bin file you downloaded and follow the on-screen prompts to "Update" or "Upgrade". The software tool should now display a "Connected"
To ensure a smooth update process without risking a device brick, verify these prerequisites:
Crucial: Do not touch the cable, turn off the PC, or switch off the meter while the progress bar is moving. 🛠️ Troubleshooting Common Failure Points
Avoid shady forums that bundle malware with firmware. Legitimate sources for Satlink WS 6933 software: Do disconnect the cable or turn off your
How to Make a Satlink WS-6933 Software Update Work: A Step-by-Step Guide
You may need to install USB-to-Serial drivers (like PL2303 or CH340) so your PC can talk to the meter's internal bridge.
: Flip the hardware power switch on the side of the device to the ON position. The main display screen must be active.
The dedicated executable PC program used to flash data files over virtual COM ports. How the PC-Based Flash Process Works