Equus 3022 Tester Manual Full Link

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

: Attach the RED (positive) clamp to the positive (+) terminal and the BLACK (negative) clamp to the negative (–) terminal.

The tester's LED screen or internal beeper will begin outputting the codes. Understanding the Code Output Structure

The Equus 3022 displays codes in a specific sequence. Understanding this sequence prevents misdiagnosis. Code Sequence Types

Ford OBD1 systems communicate codes via pulses. The Equus 3022 translates these pulses into digital readouts. Codes are displayed in the following specific order: equus 3022 tester manual full

Wipe the copper jaws after use to remove grease and corrosion.

Keep sparks, open flames, and lit cigarettes far away from the battery compartment.

: Indicates an open circuit or no power/ground present. Advanced Testing Procedures Checking Fuses

Plug both the trapezoidal lead and the single STI pin from the Equus 3022 into these respective vehicle connectors. Step-by-Step Diagnostic Testing This public link is valid for 7 days

| Feature | Equus 3022 | Equus 3100 | Equus Cigarette Lighter Tester | |---------|------------|------------|-------------------------------| | Primary Function | Full multimeter & battery tester | OBD2 code reader | Basic voltage monitor | | Battery Test | Yes (DCV) | No | Yes (plug-in) | | Alternator Test | Yes | No | Yes | | Continuity/Ohms | Yes | No | No | | Diode Test | Yes | No | No | | RPM Measurement | Yes | No | No | | Ease of Use | Moderate | Very easy | Very easy | | Typical Cost | $50–80 | $40–70 | $15–25 | | Best For | Comprehensive diagnostics | Engine code reading | Quick battery checks |

The KOEO test checks the powertrain control module (PCM) inputs and outputs for electrical faults while the engine is stationary. It also retrieves "Continuous Memory" codes, which are intermittent faults stored over the last 40 drive cycles. Step-by-Step KOEO Test Connect the tester as outlined above.

Always wear ANSI-approved safety goggles and protective rubber gloves.

The battery is completely depleted. It must be fully recharged using an external battery charger before the Equus 3022 can accurately determine its internal structural health. Can’t copy the link right now

[ Equus 3022 Analyzer ] / | \ / | \ [Red Clip] [Black Clip] [Inductive Pickup] | | | Battery(+) Battery(-) Cylinder #1 Spark Wire

Engage the parking brake and place the transmission in (Automatic) or Neutral (Manual). Turn off all vehicle accessories (radio, AC, lights). Step 2: Connecting the Tester

Color-coded copper clamps ensure a secure, low-resistance connection. Step-by-Step Battery Voltage Test