Click the (Square button) in the Research Download Tool to exit download mode safely. Unplug the USB cable from your phone.
Release the boot key once the progress bar turns blue or yellow.
The tool will cycle through various flashing stages ( FDL , Flash_Bld , NV , etc.).
Do not touch the phone, cable, or computer during this time. The process typically takes between 2 to 5 minutes. nokia ta1304 flash file pac file fixed
The tool should automatically detect the phone, and the flashing process will begin (indicated by a progress bar).
The progress bar will turn blue and display text indicating active flashing stages like SYSTEM , BOOT , and USERDATA . during this process. Step 6: Complete the Repair
Flashing your Nokia TA-1304 is a powerful method for fixing severe software issues that standard resets cannot resolve. While the process is technical, anyone can do it successfully with the right tools, the correct firmware, and careful attention to detail. By following this guide, you can likely restore your Nokia 105 SS to full working order and avoid a costly repair or replacement. Click the (Square button) in the Research Download
Browse to the folder where you extracted the Nokia TA-1304 firmware. Select the .pac file and click .
Here are some frequently asked questions about the Nokia TA-1304 flash file PAC file fixed:
Download and extract the firmware and flash tool into a single folder on your desktop for easy access. This process will wipe all data from the phone, including contacts and messages. 2. Loading the PAC File The tool will cycle through various flashing stages
While holding the key, connect the phone to your PC via a USB data cable.
Follow these exact steps to flash the fixed PAC file onto your Nokia TA-1304: Step 1: Install the Drivers Extract the downloaded package.
| Error Code | Meaning | Solution | | :--- | :--- | :--- | | 0x80070002 | Missing partition | Re-download the PAC file – corrupted. | | Sahara Fail: Invalid Command | Driver conflict | Uninstall other Qualcomm drivers (LG, Motorola). Use Zadig to replace driver with WinUSB . | | Firehose Fail: Authentication Required | Anti-rollback active | Use a fixed PAC with removed auth. | | NAND Flash: Bad Block 0x200 | Physical memory damage | Flash with Skip Bad Blocks enabled (custom PAC only). | | Status Secure: Flashing not allowed | Bootloader locked | Your “fixed” file isn’t truly fixed. Find a Secured Disabled version. |
Veer stopped sweeping. "Wait, you actually got it?"
Wait for the tool to finish loading the file. The firmware version name will display in the top bar of the application once fully loaded. Step 4: Boot the Phone into Flashing Mode