I can provide specific troubleshooting steps or help locate the exact utility configurations for your setup. Share public link
Connect the DB9 end of the cable to your PC (or your USB-to-Serial adapter).
Guide to Upgrading the Satlink WS-6906 Upgrading the firmware on a Satlink WS-6906
: Open the upgrade program (e.g., SatlinkTools) as an administrator. satlink ws-6906 software upgrade
Wait approximately for the progress bar to complete.
: Once the program shows "Succeed connecting COM1" (or your specific port), click Confirm . Load Firmware :
Beyond just "having the latest version," specific benefits of a software update include: I can provide specific troubleshooting steps or help
Because the Satlink WS-6906 relies on a legacy architecture, the update cannot be done over Wi-Fi. You must physically connect the meter to a PC. Ensure you have the following components ready:
You need the specialized 3.5mm jack-to-RS232 (DB9) cable that came in your original box.
Before starting the upgrade, you must gather the necessary hardware and files. Using incorrect tools can permanently damage ("brick") your device. Wait approximately for the progress bar to complete
: If possible, use the Read parameters feature in SatlinkTools to save your current configuration to your PC before overwriting it.
on your computer. If possible, right-click the program and select "Run as Administrator" to ensure it has proper access to your COM ports. Power On the Meter : Turn the power switch to the Establish Connection : In the software, look for a confirmation message such as "Succeed connecting COM1" (the COM port number may vary). Click Load the Firmware "Load Software" button in the program. Select the correct file from your computer. Execute the Update to begin the process.
Even seasoned techs hit snags. Here is how to fix them:
Hit the buttons below to follow us, you won't regret it...