Riso Error A16-525 | TRUSTED |

If the problem persists, check if there are any firmware updates available for your Riso duplicator. Additionally, have a professional inspect the control board for faults.

要解决一个技术问题，首要任务是理解其含义。RISO设备的错误代码由两个独立部分组成，这有助于我们从根本上解读A16-525的含义。

Gently pull the jammed master out in the direction of normal travel to avoid tearing it.

The Riso error code indicates that a master is stuck on the print drum or that the machine thinks one is present when it isn't . This usually happens when the master sensor cannot detect the drum's surface correctly. Common Fixes riso error a16-525

Push the drum back into place until it clicks. Press the yellow Reset button on the control panel to clear the notification. 3. Step 2: Fixing a "False" Error (No Master Found)

Clean the light absorber strip with a lint-free cloth. If you recently replaced your screen, double-check that the cloth isn't covering the sensor's path.

: Use a lint-free cloth lightly dampened with high-percentage isopropyl alcohol. Gently scrub any ink buildup off the black strip. Let it dry completely so it regains its matte appearance. If the problem persists, check if there are

Locate the master disposal unit (usually adjacent to the print drum area).

If the sensor detects a master (or believes it does), it triggers the to prevent a new master from wrapping over an old one, which could severely damage the print screen. 2. Step 1: Clearing a Physical Master Jam

Here is a comprehensive guide to understanding what this error means, why it happens, and how to troubleshoot and resolve it. What Does Riso Error A16-525 Mean? The Riso error code indicates that a master

To troubleshoot the A16-525 error effectively, it helps to understand the engineering behind how a Risograph checks the drum.

The drum may not be stopping at the correct "Position-A" angle, causing the sensor to look at reflective metal instead of the black absorber strip. Physical Obstructions:

If an actual master is wrapped around or jammed inside the drum assembly, follow these steps to clear it manually:

Open the front door of the Risograph and carefully pull out the active print cylinder (drum).