Motorola Cp1300 Frequency List -
If you need a ready-to-use frequency list for your team, contact a Motorola dealer for a licensed business frequency coordination. For amateur or hobby use, consult your local repeater directory and ensure your CP1300 is aligned to the correct band split.
. This software allows you to input specific Transmit (TX) and Receive (RX) frequencies, as well as TPL/DPL (privacy) codes. Hardware Requirements : A specific CPS programming cable
Many organizations use the Motorola CP1300 alongside standard consumer walkie-talkies. To make your CP1300 talk to regular UHF radios, program these standard frequency lists into your device. PMR446 Frequencies (Europe & Asia UHF)
5W for VHF models; 4W for UHF models (both can be adjusted to 1W for battery saving). Signaling: Supports CTCSS/DCS (PL/DPL) tones and DTMF signaling. www.motorolasolutions.com Programming and Use motorola cp1300 frequency list
The Ultimate Motorola CP1300 Frequency List and Programming Guide
Select your interference eliminator code () if needed.
Note: Operating a commercial radio on these frequencies often requires a specific business license depending on your local jurisdiction (such as the FCC in the United States). Programming a Custom Frequency List If you need a ready-to-use frequency list for
4.5/5 stars
Approximately 11 hours with the standard Li-Ion battery; up to 16 hours with the high-capacity option. www.motorolasolutions.com How to Check/Set Frequencies Look at the Model Number:
Turn off the radio, connect the cable to the side accessory port, plug the USB into your PC, and turn the radio back on. This software allows you to input specific Transmit
In some regions, a split-band version exists (e.g., 146–162 MHz or 150–174 MHz). Always verify with the radio’s model number label.
The Motorola CP1300 frequency list includes a wide range of channels across the VHF and UHF bands. The radio operates on 16 channels, with a frequency range of 403-470 MHz (UHF) and 136-174 MHz (VHF). The frequency list includes:
Importantly, the CP1300 is a . It does not support digital modes (like DMR or P25) and has no front-panel frequency input (FPP). All frequencies must be pre-programmed by a dealer using Motorola’s CPS (Customer Programming Software) and a compatible programming cable.
