Epson 1390 Resetter Fix Today

To reset your Epson 1390 printer, you'll need to download and install an Epson 1390 resetter software or use a hardware device. Here's a step-by-step guide:

Click the button. Choose your Epson 1390 printer from the list of available port options. If you don't see your printer, ensure it is powered on and the USB cable is properly connected.

Turn on your printer. The red blinking lights should now be gone. Alternatives to Software Resets

Click the button. The software will read your printer's memory and display your current usage percentage (it will likely show 100%). Step 4: Perform the Reset Keep the Main pad counter box checked. Click the Initialization button. A pop-up window will ask for confirmation. Click OK . epson 1390 resetter

You can reopen the Adjustment Program, go back to the Waste Ink Pad Counter, and check the values to confirm they have been reset.

The Ultimate Guide to the Epson 1390 Resetter: Fixing the "Service Required" Error

In the Model Name drop-down menu, choose . Set the Port to USB001 (or the corresponding USB port your printer is plugged into). Step 3: Access the Maintenance Menu Click on the "Particular adjustment mode" button. To reset your Epson 1390 printer, you'll need

Have you set up an or do you need help accessing the internal pads?

Warning: resetting the waste ink pad counter does not empty or service physical ink pads — it only clears the printer's "service required" counter. Physically inspect or replace pads if heavily saturated to avoid ink overflow.

Performing a reset using third-party tools may void your printer warranty if it is still active. Check your warranty terms before proceeding with any reset operation. If you don't see your printer, ensure it

Look for the executable file, typically named AdjProg.exe , and double-click to run it. Click the or "Select" button.

: Align the resetter's pins with the cartridge chip's contacts. Hold for 3–5 seconds until the LED light changes from red to green. WIC Reset Utility :

The (officially known as the Epson Adjustment Program ) is specialized software that communicates with your printer's motherboard to reset this internal "waste ink pad counter" back to zero. Why Is the "Service Required" Error Triggered? Your Epson 1390 has two main internal counters:

Locate the small rubber tube that guides waste ink into the internal pads. Pull this tube out gently. Connect it to an external silicone extension tube.