Canon Service Tool V1074 Updated Jun 2026

Although the tool is not officially documented, user-community testing has confirmed the following models work flawlessly with the updated V1074:

The is a legacy software utility used to perform maintenance on older Canon Pixma printers. It is primarily used to reset the ink absorber counter (also known as the waste ink counter), which triggers "Ink Absorber Full" errors that prevent the printer from functioning. Key Features of v1074

The Service Tool will not recognize your printer under normal operating conditions. You must manually boot the printer into using a hardware key sequence.

: You can print the EEPROM data to view the printer's history, including page counts, error logs, and ink usage. canon service tool v1074 updated

The tool enables technicians to set the printer's destination region (e.g., USA, JPN, EUR). This is crucial because ink cartridge compatibility and printer behavior can vary by region. It also allows for setting the ink absorber counter, among other settings.

: While holding Stop, press and hold the Power button. The power LED will light up.

: The most common use is resetting the waste ink counter to 0% to clear "absorber full" errors. You must manually boot the printer into using

When your Canon printer suddenly stops working and displays flashing lights or cryptic error codes like or 1700 , you are likely dealing with a full waste ink pad counter. Canon builds a safety mechanism into its printers to prevent excess ink from leaking out of the machine. Once this internal counter hits 100%, the printer locks itself down.

Demystifying the Canon Service Tool V1074 Updated: The Ultimate Guide to Resetting Canon Printers

: The green power light should blink a few times and then remain lit steadily. If the orange light stays on or continues flashing, the printer failed to enter Service Mode, and you must restart the process. How to Use Canon Service Tool V1074 to Reset the Counter This is crucial because ink cartridge compatibility and

The updated v1074 version provides a more stable interface for modern Windows environments and supports a wider range of G-series and MG-series printers.

: Click the EEPROM button to print a status sheet. Check the D= value; it should now read D=000.0 , indicating the counter is reset. Critical Safety Warnings

While continuing to hold the button, press the Stop/Reset button exactly 5 times (or 6 times for certain MG-series models). With each press, the alarm and power LEDs will alternate between orange and green. Release the Power button completely.

: Release both buttons. Once the power light is steady, the printer is in Service Mode.

Canon machines do not possess physical sensors to measure how wet these pads are. Instead, the printer relies on an internal digital counter that estimates waste ink volume based on the number of cleanings and pages printed. Common Symptoms of a Full Counter