Rename it to fmw_tronxy.bin (though some versions may require different names like update.cbd ).
, and fix common bugs found in older stock versions. Use this guide to identify your current setup and apply the latest available firmware. 1. Identify Your Current Firmware & Hardware
The printer hummed—a deep, satisfied thrum, like a cat waking from a nap. Leo loaded a 12-hour print of a cosplay helmet, something that would have taken 18 hours before. The Tronxy estimated 6 hours and 14 minutes.
Because sensor tolerances change with new software, carefully re-calibrate the distance between your nozzle and the bed using the paper test. tronxy xy2 pro firmware update new
Turn on the machine and wait for the update sequence to finish.
> Would you like to enable “Legacy Mode” (slower prints, manual leveling) or “Ascension Mode” (full AI tuning, silent steppers, 200mm/s max)? > [Ascension Mode selected in 5 seconds…]
Before downloading any file, you must check your motherboard version. Installing the wrong firmware can render your printer unusable ("bricked"). Rename it to fmw_tronxy
For the most stable experience, Tronxy provides "Parameter Firmware" tailored to specific motherboard versions.
Download the latest .cbd or .bin update pack from the official Tronxy support website.
In your Marlin configuration file ( Configuration.h ), find the line: The Tronxy estimated 6 hours and 14 minutes
Leo’s jaw dropped. “Predictive Extrusion? That’s not even in the official notes.”
Use a standard SD card (8GB or 16GB works best). Format it to FAT32 with a 4096-byte cluster size .
Depending on your comfort level, you have three main options for your XY2 Pro:
Allows you to adjust the Z-offset in real-time during the first layer of a print.