Plug the small end of the USB cable into the top port of the Innova 3160g.

The original "RepairSolutions" desktop software was officially phased out. Users were encouraged to switch to the RepairSolutions2 app

: The most significant update path is through the RepairSolutions2 mobile app . By connecting the tool to your mobile device, you gain access to 2021-verified fixes, predicted parts needed, and TSBs (Technical Service Bulletins).

: The ability to read and clear trouble codes for anti-lock braking and supplemental restraint systems.

: If the update hangs at 1% or 5%, try disabling your antivirus software or switching to a different USB port. Innova Electronics Knowledge Base 🚗 The "Good Story" of the 3160g

If you own a 3160G and have never updated it, you are likely running firmware from 2019 or 2020. To get the full 2021 experience:

Innova uses a proprietary software called to deliver updates. Follow these steps to refresh your tool. 1. Prepare Your Equipment Find a stable USB-to-Mini-USB cable. Use a PC running Windows 7, 8, 10, or 11. Ensure you have a stable internet connection. 2. Download the Updater Software Visit the official Innova website. Navigate to the Support or Downloads section. Download the RepairSolutions2 desktop launcher. Install the software on your computer. 3. Connect the Innova 3160g Launch the RepairSolutions2 application on your PC. Connect the 3160g to your PC using the USB cable.

The software will automatically check your scanner's current firmware version against the 2021 server database.

This is the most common complaint with the 3160g.

Temporarily disable aggressive antivirus or firewall software, as they can sometimes block the update tool from downloading files from Innova’s secure servers. Conclusion

Try a different USB port or a different USB cable. Avoid using external USB hubs.

Accurate definitions for the latest OBD2 codes (including ABS and SRS).

. This is the bridge used to connect the legacy 3160g to your computer. Check for Firmware:

Wait a few seconds for the software to detect your tool. The status should change from 'Disconnected' to 'Connected', displaying your current firmware version and database. Step 4: Check for Updates

It also has a broad spectrum of ABS & SRS diagnostic capabilities, oil light reset, oil level and life, check engine lights, smog/ Innova 3160d update