G Star Iv Gps Driver Download Bu-353s4 Windows 11 =link= -

When you plug the BU-353S4 into a fresh Windows 11 machine, the OS shrugs. It sees a "USB Serial Converter." It installs a generic Microsoft driver (usbser.sys). And then... nothing. The GPS puck lights up (steady blue LED), but your navigation software (OpenCPN, Google Earth, or SailGrib) hears only static.

: Ensure your navigation software is set to a Baud Rate of 4800 , which is the default for this receiver.

1. Where to Download the G-Star IV (BU-353S4) Windows 11 Driver

Note the assigned to your device in Device Manager (e.g., COM3 or COM4). You will need this number for your navigation software. Test with Globalsat GPS Utility G Star Iv Gps Driver Download Bu-353s4 Windows 11

Select .

Choose > Let me pick from a list of available drivers on my computer .

, powered by the highly sensitive , remains a trusted G-Mouse electronic device across marine navigation, fleet tracking, and aviation hobbies. However, setting up this legacy hardware on Windows 11 introduces a specific challenge: the device utilizes an older Prolific PL2303 USB-to-Serial bridge chip, which the modern Windows 11 operating system often marks as unsupported or defective. When you plug the BU-353S4 into a fresh

Extract the downloaded ZIP file to a folder on your desktop.

After installation, go back to Device Manager. Under "Ports (COM & LPT)", you should now see "Prolific USB-to-Serial Comm Port (COMx)" without any warning icons. The "x" will be the COM port number assigned to your GPS receiver.

You should now see: Prolific USB-to-Serial Comm Port (COMx) . Note the number (e.g., COM3). 4. Troubleshooting: "This Device Cannot Start (Code 10)" nothing

Follow these sequential steps precisely to configure your hardware. Do not plug the GPS unit into your USB port until instructed. 1. Download the Working Legacy Driver G star iv gps driver installation

You can use free software to verify the GPS is sending data: