Regularly inspect the reservoir to prevent the pump from running dry.
The Castrol LubeCon Advanced System Controller represents a significant step forward in automated lubrication technology. By understanding its core components, installation requirements, and programming logic, you can drastically reduce wear, extend equipment life, and minimize costly downtime.
Be cautious of manualscave.com or similar. Outdated manuals may reference dip-switch configurations that no longer exist on newer SMD circuit boards.
Save the parameters to the controller memory. Utilizing Machine Run Contacts
If you need new features (e.g., Ethernet/IP or Profibus integration), order a new controller module. Firmware is factory-locked to maintain ATEX and CSA hazardous location certifications.
The table below highlights key technical specifications for the LubeCon ASC, derived from official LubeCon product manuals.
Always disconnect and isolate all power and relieve system pressure before performing maintenance or installing new components.
The manual covers several hardware variants, including:
Check delivery lines for kinks or blockages; test the pump manually to verify pressure output.
Maintain the legibility of all warning labels and use only specified LubeCon lubricants to prevent system clogging or mechanical failure.
: The system requires a 24 VDC incoming control cable connected to the controller terminal strip following the specific wiring schematic.
Mount the controller enclosure on a vibration-free vertical surface. Ensure easy eye-level access for maintenance personnel.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Automated Conveyor Oil Controllers - LubeCon USA