: Use a complete 4-file firmware package (BL, AP, CP, and CSC). Ensure the Samsung USB Drivers are up to date.
: Connect your cable directly to a motherboard port on the back of your PC (for desktops). Avoid external USB hubs or USB 3.0 (blue) ports, as Odin sometimes prefers the stability of USB 2.0.
The re-partition failure is typically caused by one or more of the following:
Use a modern version of Odin (v3.13.1 or newer) for devices running Android 8.0 and above. Summary Table: When to Check "Re-Partition" Re-Partition Checkbox PIT File Required? Fixing "Stuck at Logo" Changing Regions Rooting/Custom ROM No (usually) re-partition operation failed. odin
Odin struggles with USB 3.0 or USB-C ports on newer computers. Plug your cable into a USB 2.0 port.
If you have applied the correct PIT file, swapped cables, used a full 4-file firmware pack, and Odin still fails at the exact same "re-partition" step, your device likely has a .
Flash official combination firmware to restore partition alignment, then reflash stock ROM. : Use a complete 4-file firmware package (BL,
If you still get the error, a more aggressive method is required. A NAND Erase wipes all data from the memory chip, forcing a total rebuild.
Look for the or U number in your firmware string (e.g., G973FXX**U3**ASG8 ). The digit following the "U" or "S" is the binary level.
Before diving into the more complex fixes, it's crucial to rule out simple problems: Avoid external USB hubs or USB 3
Flashing firmware that doesn't match the specific model or binary version of the phone.
: Temporarily disable any antivirus software or firewall that might be interfering with Odin's operations.