By the end of this article, you will have a fully functional L2TP/IPsec VPN server on your MikroTik RouterOS device (RB series, Cloud Core Router, or CHR).
If you encounter issues with your L2TP server, check the following:
Setting up L2TP/IPsec on MikroTik is straightforward once you understand the interplay between PPP profiles, firewall rules, and IPsec policies. The solution is fast, secure, and compatible with essentially every device on the planet.
To allow a user to access the LAN and internet, no additional routes are needed if your local LAN subnet is reachable from the VPN pool. mikrotik l2tp server setup full
Fix: Ensure your firewall allows the forward chain for traffic originating from the 192.168.89.0/24 subnet. If users cannot ping local LAN devices, navigate to -> ARP on your local LAN interface and change the ARP mode to proxy-arp . This forces the router to answer ARP requests on behalf of the remote VPN clients.
: If clients need to reach devices on your local LAN, you may need to set Bridge to your main LAN bridge or enable proxy-arp on your LAN interface. 3. Add VPN Users (Secrets) Create credentials for each user connecting to the VPN. Menu : PPP > Secrets Command :
To authenticate L2TP clients, you need to create a user account: By the end of this article, you will
Setting up an L2TP/IPsec VPN server on a MikroTik router provides a secure, reliable, and universally compatible way to access your home or office network remotely. By following the steps outlined in this guide, you can have a robust VPN up and running. Remember to always use strong passwords and Pre-Shared Keys, and keep your RouterOS version up-to-date for the latest security patches and features.
/ip ipsec proposal add name=l2tp-proposal enc-algorithms=aes-256-cbc auth-algorithms=sha256 pfs-group=none lifetime=30m /ip ipsec peer add address=0.0.0.0/0 auth-method=pre-shared-key secret=MySuperSecretKey123 enc-algorithm=aes-256 hash-algorithm=sha256 exchange-mode=main-l2tp /ip ipsec policy add src-address=0.0.0.0/0 dst-address=0.0.0.0/0 sa-src-address=YOUR_WAN_IP sa-dst-address=0.0.0.0/0 protocol=udp proposal=l2tp-proposal template=yes
/ip l2tp set [ find default=yes ] authentication=chap, pap set [ find default=yes ] ip-range=10.0.0.2-10.0.0.100 set [ find default=yes ] secret=l2tp_secret set [ find default=yes ] server=10.0.0.1 set [ find default=yes ] server-port=1701 To allow a user to access the LAN
Next, create a DHCP-style server configuration for the VPN (this assigns IPs, DNS, and wins to clients):
/ip firewall filter add chain=input protocol=udp dst-port=500,1701,4500 comment= "Allow L2TP/IPSec" add chain=input protocol=ipsec-esp comment= "Allow IPSec-ESP" Use code with caution. Copied to clipboard
No hay productos en el carrito.