Bonavita Hudson II Lifestyle Crib Instructions: Your Complete Guide to Assembly, Safety, and Convertible Stages
Complete Guide and Assembly Instructions for the Bonavita Hudson II Lifestyle Crib
Prethread the bolts into the footboard's bottom legs. Insert the remaining 2-inch Allen bolts through the crib's sides and into the footboard, tightening them securely. Conversion Guide
Repeat this process for the right side panel. Do not tighten the bolts completely yet; leaving a small amount of slack makes aligning the mattress support easier. Step 2: Install the Mattress Support Spring Frame bonavita hudson ii lifestyle crib instructions
Losing or misplacing your is a common challenge for many parents. Because Bonavita is no longer actively manufacturing furniture, finding official manuals online can be incredibly frustrating.
According to the American Academy of Pediatrics and Bonavita manual:
Step 3: Install the Mattress Support FrameThe mattress support is a metal grid that holds the weight of the mattress and your baby. Most Hudson II models offer three height positions.Newborns: Use the highest setting to save your back while lifting the baby.Active Babies: Once your child can sit up, move it to the middle setting.Toddlers: Once your child can stand, use the lowest setting to prevent them from climbing out.Bolt the support frame into the brackets on the corner posts. Ensure the "Warning" labels on the support frame are facing upward. Do not tighten the bolts completely yet; leaving
: Needed for tightening the mattress support brackets. Hardware Identification
: You will primarily need an Allen wrench (typically included) and a Phillips head screwdriver .
Align your full-size wooden bed rails with the mounting slots or holes on the inner sides of the headboard and footboard posts. According to the American Academy of Pediatrics and
Align the brackets with the selected holes on the corner posts. Bolt the brackets into the posts securely using medium Allen bolts. Step 4: Attach the Front Panel (Footboard)
Attach the headboard to the crib sides using Allen head bolts and washers. Secure these using the Allen wrench. Install the Mattress Support:
The Hudson II uses a metal frame wrapped in wood veneer. You will insert this into the inner tracks.