Adjustment Program Epson Sx 230 Resetter Epson Sx | 230 16 Portable

The SX230 does not provide an end-user interface for resetting the waste ink counter through standard driver software. The Adjustment Program is a proprietary service tool intended for authorized technicians.

Click on the button (usually located on the right side).

To prevent overflow and potential damage to the printer chassis or surrounding surfaces, the SX230’s main board firmware runs a "protection counter." When the estimated volume of waste ink reaches a critical threshold, the printer triggers a service error, displaying messages such as "Service Required" or "Parts inside your printer are at the end of their life." The Adjustment Program serves as the primary service tool to reset this counter, restoring the printer to operational status.

A: Theoretically unlimited. Practically, after 3–4 resets, the waste pads will likely leak, requiring physical intervention. The SX230 does not provide an end-user interface

: Run the adjustment program (often named AdjProg.exe ). You may need a password, typically found in a "password.txt" file within the download folder. Enable Sequential Mode : Open the "Enable" application included in the package.

Epson uses a built-in counter (the Waste Ink Pad Counter) to estimate how much ink these pads have absorbed.

: The most common use is resetting the main and platen pad counters back to zero percent, effectively "unlocking" the printer. EEPROM Initialization To prevent overflow and potential damage to the

Check the boxes for and Platen Pad Counter .

Select (sometimes listed as "washing pet AC"). Tick the boxes for Main Pad Counter and Platen Pad Counter .

or install an external waste ink tank to prevent damage to your printer or furniture. : Run the adjustment program (often named AdjProg

magically empty the physical waste ink pads inside the machine. Risk of Leakage:

Check the boxes for and Platen Pad Counter . Click Check to see current usage percentages.

After a brief calculation, a prompt will appear saying: "Please turn off the printer."

A: No. This resetter is only for the “Service Required” error, not for ink level monitoring.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.