Pacific Fitness Del Mar Home Gym Assembly Manual Jun 2026

Pacific Fitness went out of business around 2006-2008. Their parent company, Fitness Quest, no longer produces the manual. —they are disconnected.

Spin the pulleys manually to ensure they turn freely without grinding. If a pulley is stuck, replace it to prevent it from sawing through your cable.

Use a small amount of glass cleaner on the tubes to help slide foam rollers into place. Reference Resources

Original printed manuals for the Pacific Fitness Del Mar can be rare, as the company has changed ownership over time. However, digital PDFs are available through:

Slide the weight cushions and spacers onto the rods first. Then, slide each weight plate down one by one, ensuring the pin holes face forward Selector Stem: Insert the selector stem through the center of the stack. 3. Top Beam & Attachments pacific fitness del mar home gym assembly manual

Inspect cables for cracks, peeling nylon coating, or exposed steel wires. Weekly

Due to the weight of the main uprights and the stack, assembly is a two-person job .

Mount the main post using carriage bolts and lock nuts. You may need an extended flex bit for some angled fasteners.

Assemble the main press arm assembly and connect it to the main upright. Pacific Fitness went out of business around 2006-2008

Wipe down pads after every workout with a damp cloth and mild soap to remove sweat oils. Avoid harsh chemical cleaners that crack the vinyl.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

: For tapping plastic end caps and guide rods gently into place without scratching the powder coat.

Secure the and Backrest Pad to their respective brackets using the smaller Phillips bolts. Spin the pulleys manually to ensure they turn

Final tightening and inspection

Household glass cleaner (like Windex) for easier foam roller installation. 2. Main Frame Assembly

The foundation of your home gym dictates its structural integrity.

Lift the central vertical frame post onto the base plate. Align the bolt holes at the bottom. Secure it using the specified hex bolts.

: Slide the nylon or steel pulley wheels into the bracket housings after the cable is passed through. Tighten the retaining bolts securely to prevent the cable from slipping off track.