Dc E2h Datasheet Free

: Fixed at 1.8V (indicated by the "-18" in the part number). Output Current : Up to 300mA . Dropout Voltage : Typically 220mV at full 300mA load. Input Voltage Range : Supports 2.5V to 5.5V . Package Type : SOT-23-5 (5-pin Small Outline Transistor).

Ground Reference. Serves as both the signal ground and the thermal dissipation pathway.

: The internal compensation network allows for microsecond-level settling during step loads (e.g., 100mA spikes), ensuring system stability. dc e2h datasheet

The DC=E2H utilizes a standardized 5-pin SOT-23 layout. Proper connection of the bypass and enable pins is critical for unlocking its low-noise performance characteristics.

This article serves as a detailed guide to the , outlining key technical specifications, operational advantages, and application areas. 1. Overview of the Intronics DC-E2H Series : Fixed at 1

: Low power consumption, typically < 0.01μA in shutdown mode. Operating Temperature : Features

What is the or voltage requirements you are working with? DC=E2H PDF资料大全 - Datasheet - 电子工程世界 Input Voltage Range : Supports 2

SOT-23-5 (Small Outline Transistor, 5-pin) SOT-23-5 Pinout Definition

The is optimized for low-noise, high-PSR (Power Supply Rejection Ratio) operation. It provides a fixed, ultra-stable output of 1.8V DC from input supply rails ranging up to 5.5V. Key Features & Performance Metrics Fixed Output Voltage: 1.8V DC Maximum Output Current: 300mA Continuous Dropout Voltage: 220mV (typical) at full 300mA load

: Includes integrated thermal shutdown and current-limit protection to prevent device failure during fault conditions. Pin Configuration (SOT-23-5) VIN : Input Voltage GND : Ground EN : Enable (High = On, Low = Shutdown) BP : Bypass (Connect a capacitor for noise reduction) VOUT : Regulated 1.8V Output

Bypass. Connecting a small 22nF capacitor here significantly reduces output noise.