Orbitor Prospector 100 - Metal Detector Manual Fixed
Turns the unit on/off and controls the speaker or headphone volume.
Low frequency for optimal ground penetration.
Wrap the search coil cable snugly around the stem. Leave enough slack at the bottom so the coil can tilt freely without straining the wire.
: Loosen the cam lock on the upper stem. Extend the lower stem until the coil rests flat on the ground while standing straight. Tighten the lock. Orbitor Prospector 100 Metal Detector Manual
Before heading out, test your machine with common items (a nickel, a pull tab, an iron nail). Turn on the detector in .
To get the best performance, you must tune the detector to your local environment before scanning. Outdoor Air Test Turn the unit on and set to a comfortable level. Set DISC to the lowest position (All Metal).
To get the best results, follow this recommended procedure for operating the detector: Step 1: Testing and Setup Turns the unit on/off and controls the speaker
: Insert the lower stem into the search coil bracket. Align the screw holes.
Keep the search coil parallel to the ground at a height of 1 to 2 inches.
Open the battery compartment underneath or on the rear of the control console. Insert fresh, high-quality alkaline batteries matching the polarity (+/-) indicators. Securely slide the cover back into place. 4. Control Panel and Interface Functions Leave enough slack at the bottom so the
To help tailor this guide or troubleshoot further, let me know:
The search coil is waterproof and can be submerged in shallow water. However, the control housing is not waterproof . Never get the control box wet.
| Item | Quantity | |------|-----------| | Control box (with LCD display) | 1 | | S-shaped stem (lower & upper) | 1 set | | 8-inch waterproof search coil | 1 | | Coil cable with connector | 1 | | Armrest with strap | 1 | | 9V alkaline battery | 1 | | Coil protective cover | 1 | | Headphone adapter (3.5 mm) | 1 | | Quick start guide | 1 |
Orbitor Prospector 100 Metal Detector Manual: The Ultimate Guide
