Intronics Digital Room Thermostat User Guide Patched

If your thermostat reads 2°C higher than reality:

: Set your overnight bedtime and a cooler sleep temperature. Press PRG .

Most Intronics digital thermostats feature a capacitive touch panel with backlit buttons for easy operation:

: Restricts the maximum target temperature a user can set (Default: 35°C). intronics digital room thermostat user guide

Access these via the setup/service menu—consult the model-specific documentation for exact button presses and parameter codes.

Many models have a dedicated Fan button to cycle through Low, Medium, and High speeds.

A: This port connects to external devices for energy savings. For example, a normally closed contact (like a window switch) can be configured to automatically adjust the set point by 2°C, saving energy when a window is open. If your thermostat reads 2°C higher than reality:

: Use the Up and Down arrows to set your desired comfort level. On most digital displays, the larger number is the current room temperature, while the smaller number indicates your target set-point.

General approach (exact steps vary by model):

A: Use a soft, slightly damp microfiber cloth. Make sure the cloth is only damp, not wet, and never spray any liquid directly onto the thermostat. For example, a normally closed contact (like a

Press the up or down arrows (on models with multiple buttons) or tap the single button to scroll through temperature setpoints (usually in 1°C increments). Display: The screen will show the desired room temperature. 3.3. Fan Speed Control

: Adjusts the internal sensor reading up or down by +/- 5°C if the thermostat reads higher or lower than actual room temperature.