A capture mode defines the maximum resolution and frame rate available. A mode with larger maximum resolution has a reduced maximum frame rate, and vice versa. : Changing the capture mode after the product has been configured is not recommended, as most other settings will be either removed or reset.
This central menu allows you to control everything from the default video format to custom on-screen buttons.
While Live View in Axis cameras is a reliable feature, users may encounter issues from time to time. Here are some common issues and troubleshooting tips: intitle liveview axis 2021
From , you select the default method for viewing video images in your browser. The Axis product attempts to show video in the selected format and viewer; if that is not possible, it automatically overrides the settings to select the best available combination.
While Axis produces robust, reliable surveillance solutions, the vulnerability often lies in the installation rather than the hardware itself: A capture mode defines the maximum resolution and
| | Likely Cause | Solution | | :--- | :--- | :--- | | H.264/H.265 not displayed in browser | Browser lacks native H.265 decoding; AMC not installed | Use Motion JPEG stream profile instead (may increase bandwidth) | | No audio in Live View | Audio configuration settings incorrect | Go to Configuration > Video & Audio Settings and verify audio is enabled | | Cannot select H.265 encoding | Web browsers do not support H.265 decoding | All browsers rely on plugin‑based H.265; use H.264 or Motion JPEG | | Cannot access Live View | IP address conflict or incorrect subnet | Run ping command; if Request timed out , IP is available. Check all cabling | | Multicast stream not visible | Firewall blocking multicast traffic | Coordinate with network administrator to validate multicast addresses and ports | | Upgraded camera no longer shows video | Incorrect AXIS OS file uploaded | Confirm correct firmware filename for your exact model; camera rolls back to previous version on failure | | PTZ joystick mode not responding | Viewer settings missing crosshair/joystick mode | Enable Show crosshair in PTZ joystick mode and Use PTZ joystick mode as default |
The Live View page loads. By default, this page displays the camera's primary video stream, plus optional viewer controls and action buttons. This central menu allows you to control everything
The query likely refers to technical discussions from 2021 involving Phoenix LiveView
A stream profile is a set of predefined stream settings that includes resolution, compression, frame rate, and overlay settings. Stream profiles can be applied when setting up action rules, configuring continuous recording, or directly from the Live View page via the Stream Profile drop‑down list. To create or modify a stream profile, navigate to . To set a default profile for the Live View page, go to Setup > Live View Config .
