: A standard kit includes brass threaded tails, chrome back plates, an instruction manual, and a dedicated drain-down key Static Caravan Spares Operational Guidelines Temperature Range
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The CaraFlo V200 is equipped with a thermostatic mixing valve designed to prevent scalding.
Ensure the hot water supply is piped to the left inlet and the cold water supply is piped to the right inlet. The valve will not function correctly if piped configuration is reversed.
The maximum mixed water temperature is preset for safety but can reach up to 46°C. caraflo v200 shower instructions
Wind high-quality thread-sealing tape clockwise around the 1/2" BSP male threaded brass tails. Thread them securely into the hot and cold water supplies behind the partition wall.
Do not overtighten; a secure hand-tight turn followed by a quarter-turn with a wrench is typically sufficient. Step 4: Connecting the Shower Kit
Open all taps and the shower valve to drain remaining water.
Drill access holes through the shower wall paneling, ensuring they are large enough to accommodate the supply pipes but small enough to be hidden by the decorative concealing plates (shrouds). : A standard kit includes brass threaded tails,
What do you have? (e.g., Combi boiler, 12V microswitch pump, or high-pressure mains?)
Secure the mounting plate or elbows to the wall using the provided wall plugs and screws.
The is the industry standard for modern touring caravans, motorhomes, and static holiday homes across the UK and Europe. Manufactured as the official successor to the older V100 model, the V200 is natively fitted by leading brands like Swift, Willerby, ABI, and Victory.
Before beginning installation, ensure your water system matches the operational parameters of the valve. 0.5 bar Maximum Operating Pressure: 5.0 bar Recommended Pressure: 1.0 to 3.0 bar Hot Water Supply Temperature: 55°C to 65°C Cold Water Supply Temperature: 5°C to 25°C Can’t copy the link right now
Align the shower valve inlets with the hot and cold supply pipes.
Ensure your water heater is maintaining steady heat. Clean or replace the thermostatic cartridge. Damaged flow control valve
If your water heater has a boost setting, activate it 15 minutes before showering to ensure you have a full tank of hot water ready. 3. Maintenance and Winterization
Screw the Caraflo V200’s connecting nut onto the shower arm by hand. Turn clockwise until it stops.