Chipblaster Jv10 - Manual Verified

The is a highly durable, high-pressure, high-volume coolant delivery system designed to optimize CNC machining operations. By delivering a continuous stream of filtered coolant at high velocities, the JV10 lowers cutting temperatures, clears away chips from the work area, and drastically improves tool lifespan and surface finish.

Ensure the main CNC machine coolant tank is entirely free of sludge, fine chips, and tramp oil before starting.

Route the bypass hose from the regulator valve back into the machine tool's coolant tank. Ensure this line discharges below the oil level to minimize foaming and mist generation. Electrical Integration and M-Code Interface

Wear appropriate personal protective equipment (PPE), including safety glasses and oil-resistant gloves, when handling coolant and filters. chipblaster jv10 manual

The Chipblaster JV10 manual is a comprehensive document that covers all aspects of the machine's operation and maintenance. Here's an overview of the manual's contents:

: Facilitates operations such as "jog air purge" to remove air from the lines after a coolant change or during initial setup. Automatic Protection

The unit utilizes an adjustable relief valve or unloader valve. The manual instructs operators to set the pressure based on the tool diameter: The is a highly durable, high-pressure, high-volume coolant

Open the 1/4" petcock valves located on top of both the primary and safety filters.

Verify that the factory line voltage matches the voltage specified on the ChipBLASTER serial plate (typically 230V, 460V, or 575V 3-phase).

Inspect hoses and fittings for signs of fraying, weeping, or bubbling. Route the bypass hose from the regulator valve

The "auto cross" option is a sophisticated feature that allows the system to automatically switch between two coolant sources or supply lines. This is particularly beneficial for machines with multiple spindles or turrets, ensuring that high-pressure coolant is always available when and where it is needed.

The manual describes a straightforward electrical interface. Standard features include:

The your controller outputs (24V, 110V, etc.) The specific parts or wiring diagrams you are looking for